Common Problems With Drippy Sinks

Sinks can be a bit tricky because they come in many sizes and shapes. Be aware that your sink’s internal components may differ from those of other sinks.

The following issues can cause your sink to dripping:

Parts damaged

Corrosion

Parts missing

Broken Pipes

There are some problems that are more common than others. Some problems are easier to fix than others. It is a good idea to get familiar with the three most likely causes of the leak.

Adjustment Needed

Many drippy tap situations are caused by a loose component. Sometimes the components of your sink are not properly installed. You might even find that an important part of your sink was moved by impact or slowly over time.

The faucet may need to be adjusted if your sink drips. Leaks can be a sign that the faucet is loose or misaligned.

Cartridge Needs Replacement

You can assume your sink problem is more complex if your faucet is secure and in its place.

But don’t lose hope! Sometimes, it’s easier than others to deal with situations like changing a cartridge.

Depending on your sink, cartridges can be found in either the hot or cold knobs of your faucet. The purpose of a cartridge, regardless of its location, is to regulate the water flow.

Damaged or Worn parts

Over time, small and fragile parts in your sink may begin to wear. The internal components of your sink will differ depending on which type you have, as we’ve already mentioned. Don’t be alarmed if your sink has any of the parts mentioned in this article.

O-rings: Issues

Your sink has many components, including the O-ring. The O-ring is a flexible, small O-shaped disk that secures the faucet to the sink. You can identify a worn or damaged O-ring by the sink dripping.

Other worn-out rubber components

The washer is the small back part of your sink. The washer presses on the valve seat every time you use your sink. The washer can wear down over time.

The washer might not have been installed correctly in the first instance. Your sink may also drip if the washer is not properly fitted or is too small.

Some sinks are equipped with springs and boots, while others have a washer. They are functionally identical.

Supply line damage

You may discover evidence of a leak under your sink by inspecting the supply lines. The supply lines are like long metal tubes that carry water to the faucet. These lines can sometimes become damaged. More specifically, rubber gaskets that seal the supply lines can wear.

Why is it so important to ignore your sink dripping?

Leakage is not only annoying. America wastes over 1 trillion gallons annually. This water waste poses a grave threat to human life in modern times.

Water isn’t all that is going down. It could also be your money. You might be able to see more of it than you think.

Have a look. These are the most shocking facts about water waste from leaky sinks.

60% of the world’s water loss is due to leaking and drippy pipes.

The annual loss from water waste due to sink leaks is $1 billion

A leaky faucet can add $20 to your monthly utility bill. One leak can cost you $240 per year.

Your faucet is able to waste 5 gallons per day at 60 drops per minute. In a year, your faucet has lost approximately 2,000 gallons.

You should also consider the long-term consequences of a sink leaking. This can lead to mold and rust in your home, as well as other damage to your plumbing system. Sinks are designed for water to flow through them, but they are not built to handle continuous leaks.

You’ll only make your plumbing more trouble if your sink drips. The life expectancy of your sink and individual components may be shorter.

What are the Best Times to Call a Plumbing Company

It is important to call your local plumber immediately if you have any problems with your sink. You don’t want to cause more problems by damaging or replacing parts.

You should only take on a leaky sink project if your confidence is complete.

How to stop your sink from dripping

A water softener can be a great way of preventing your faucet from leaking. It will also prolong the life of many of the intricate components in your sink. Softened water is especially beneficial for rubber parts.

This is why conditioner works so well. Conditioner leaves your hair soft and silky smooth, while preventing breakage. Water softener creates water that is similar to the rubber components in your sink. It conditions them and prevents wear.

Routine maintenance can also help to prevent major plumbing problems. The same applies to preventing your sink from dripping. Routine maintenance is similar to your plumber visiting you every year for a checkup. Consider scheduling routine maintenance with a trusted plumber company.

This post was written by Joey Denick. Joey is the Owner and Operator of Clog Kings. At Clog Kings, LLC, we pride ourselves on our dedication and efficiency. We know you don’t have time to waste. That’s why we work fast to get your home or commercial building back up and running in no time. If you are looking for plumbing companies in Tampa then look no further because we got you covered!